Technical Specifications |
STEREO MASTERING EQUALIZER W796 |
Size |
V700- Double-Wide Module 2N |
|
Input |
stereo |
Type |
balanced, floating, torodial Transformer, or balanced, grounded |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu |
Input Impedance |
ƒ 40 Hz - 15kHz ³ 5 kW |
CMRR |
ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT |
|
Output |
stereo |
Type |
balanced, floating, torodial Transformer, or balanced, grounded |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu |
Source Impedance |
ƒ 40 Hz - 15 kHz £ 40 W |
Load Resistance |
³ 300 W |
CMRR |
ƒ £ 15 kHz ³ 40 dB according to IEC |
CMRR |
ƒ £ 15 kHz ³ 60 dB according to IRT |
|
Gain 2) |
all Controls at 0 dB Position 1 kHz 0 dB ± 0.5 dB |
|
Frequency Response 2) |
ƒ 20 Hz - 20 kHz ± 0.5 dB |
Phase Response 2) |
- Input/Output ƒ 40 Hz - 15 kHz £ +5/-20°
- with Standard Values for RF & LF Filters
|
|
THD |
£ +26 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 % |
|
Dynamic Range 2) |
22Hz-22kHz RMS ³ 120 dB |
Noise Level 2) |
22Hz-22kHz RMS £-90 dBu |
|
Crosstalk |
L <> R ƒ 40 Hz - 15 kHz £ - 70 dB |
|
Size |
V700 double-wide Module, standard Depth |
Frame |
needs 2 Frame Compartments |
|
Control Elements |
- Stepper Pot
|
Boost/Cut Range |
± 12 dB ± 1 dB with Center Detent at 0 dB |
Frequency HI |
1.8 kHz to 23 kHz ± 10 % |
Frequency HI-MID |
1000 Hz to 15 kHz ± 10 % |
Frequency L-MID |
100 Hz to 1.5 kHz ± 10 % |
Frequency LOW |
20 Hz to 315 Hz ± 10 % |
Q-Factor |
> 2 Octaves to a Third |
Bypass |
- hard bypass for the entire Module
- and per EQ-Band
|
Level |
± 10 dB with 0 dB Accuracy ± 0.25 dB |
Balance |
± 3 dB with 0 dB Accuracy ± 0.25 dB |
|
1) |
Depending on the setting of the control, gain or attenuation is possible. The value is valid for the higher level at the input or output. |
|
2) |
The values refer to precisely linear setting of all parameters. |
|
Index |
Home V700 Home |