Technical Data |
5.1-INPUT MODULE I63 |
Version |
6HE Cassette |
|
|
Input |
Line-In 5.1 - Standard Version |
Type |
electronically balanced |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu - Gain |
Input Impedance |
ƒ 40 Hz - 15kHz ³ 10 kW |
CMRR |
ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT |
Input |
optional Version with external Transformers |
Type |
balanced floating, Transformer |
nominal Level |
+ 6 dBu ± Gain |
maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu - Gain |
Input Impedance |
ƒ 40 Hz - 15kHz ³ 10 kW |
CMRR |
ƒ 40 Hz £ 15 kHz ³ 60 dB according to to IRT |
|
|
Output |
not existing |
Mixing Outputs |
for INTEGRATOR Bus Rails |
|
|
Gain |
- LFE GAIN ± 10 dB ± 1 dB - 0 dB ± 0.5 dB
- at Center Detent
- Fader + 10 dB ± 0.5 dB max, 0 dB ± 0.3 dB
|
|
|
Frequency Response |
ƒ 40 Hz - 15 kHz ± 0.25 dB |
|
ƒ 20 Hz - 20 kHz ± 0.25 dB |
Phase Response |
- Input/Output ƒ 40 Hz - 15 kHz £ +5°/-20°
- Standard RF / Subsonic Filters
|
|
|
THD |
£ +22 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 % |
|
|
Crosstalk |
between any 5.1 channel ƒ 40 Hz - 15 kHz £ 70 dB |
Fader Cut Off |
ƒ 40 Hz - 15 kHz £ 95 dB |
CH-On-Switch |
ƒ 40 Hz - 15 kHz £ 100 dB |
Cue- Pot's |
ƒ 40 Hz - 15 kHz £ 70 dB |
Mix-Switch |
ƒ 40 Hz - 15 kHz £ 100 dB |
|
|
Dynamic Range 1) |
22Hz-22kHz RMS ³ 124 dB - (Gain - 10 dB) |
Noise Level 1) |
22Hz-22kHz RMS £-98 dBu + (Gain - 10 dB) |
|
|
Size |
INTEGRATOR-Fader Module 6HE |
|
|
Control Elements |
Potentiometer /P&G or Ko-On Fader 100 mm |
Functions |
see Module Description |
|
|
1) |
The value refers to the post fader output. The noise level of the master outputs depends on the number of input modules. The value stated above depends on the setting of the total gain that depends on the settings of input gain and fader and do not consider the noise levels of inserted devices. All measurement are made with a source resitor of 40 Ohms. The noise level is for gain upt to + 10 dB is -98 dBu - RMS, 22 Hz to 22 kHz and increases with the gain. |