Technical Data |
STEREO LIMITER |
Version |
4HE |
|
|
Input |
Standard Version |
Type |
electronically balanced |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu - Gain 3) |
Input Impedance |
ƒ 40 Hz - 15kHz ³ 10 kW |
CMRR |
ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT |
Input |
optional Version -s |
Type |
balanced floating, Transformer |
nominal Level |
+ 6 dBu ± Gain |
maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu - Gain 3) |
Input Impedance |
ƒ 40 Hz - 15kHz ³ 10 kW |
CMRR |
ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT |
|
|
Output |
Standard Version |
Type |
electronically balanced |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu 3) |
|
³ + 22 dBu with unbalanced Load |
Source Impedance |
ƒ 40 Hz - 15 kHz £ 60 W |
Load Resistor |
³ 1200 W for + 30 dBu ³ 600 W for + 27 dBu |
CMRR |
ƒ 40 Hz - 15 kHz ³ 40 dB according to IEC |
Output |
optional Version -s |
Type |
balanced floating, Transformer |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu 3) |
Source Impedance |
ƒ 40 Hz - 15 kHz £ 60 W |
Load Resistor |
³ 1200 W for + 30 dBu ³ 600 W for + 27 dBu |
CMRR |
ƒ £ 15 kHz ³ 40 dB according to IEC |
CMRR |
ƒ £ 15 kHz ³ 60 dB according to IRT |
|
|
Gain 2) |
all Controls @ 0 dB 1 kHz 0 dB ± 0.5 dB |
|
|
Frequency Response 2) |
all Controls @ 0 dB ƒ 20 Hz - 20 kHz ± 0.25 dB |
Phase Response 2) |
- Input/Output ƒ 40 Hz - 15 kHz £ +5°/-20°
- Standard RF / Subsonic Filters
|
|
|
THD 3) |
£ +22 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 % |
|
Crosstalk |
ƒ ³ 40 Hz - 15 kHz, ³ 65 dBu |
|
|
Dynamic Range 2) |
Vu 0 dB/22Hz-22kHz RMS ³ 120 dB - Gain |
Noise Level 2) |
Vu 0 dB / 22Hz-22kHz RMS £-94 dBu |
|
|
Size |
INTEGRATOR-Standard Cassette 4HE |
|
|
Control Elements |
Potentiometer |
Threshold |
- 8 to + 20 dBr |
Attack |
50 µs to 8 ms |
Release |
100 ms bis 3 s |
Meter |
8 Led's - Range 10 dB' |
|
|
1) |
Depending on the settings of the controls gain and attenuation is possible. Value refers to the higher level on input or output. |
2) |
- Limiter inactive
|
3) |
Conditional on physical principles, the setting of compressor and expander can affect the harmonic distortion performance. Data refers to inactive compressor and expander. |