V700
Stereo Mastering
|
W768b
Stereo Fader Module with Cut Switch for V700 Standard Frames
The W768b is a stereo fader module with 127 mm/5" Penny & Giles fader and Cut Switch.
With stereo mastering, the stereo fader will be used as master fader for fade outs or to adjust the input or output level of a mastering chain.
The cut switch can be implemented as Channel On switch alternatively.
The stereo fader module is active. Inputs and outputs are balanced. Electronically balanced and transformer balanced versions are available. The maximum gain of the standard version is 15 dB; other versions are also available. The headroom of the stereo fader is + 30 dBu. The infinity cut off is better than 105 dB at any frequency below 15 kHz. The scale accuracy is better than 1 dB in the range from + 15 dB to - 40 dB. The tracking accuracy of the stereo channels is better than 0.5 dB.
The W768b Stereo Fader Module is a single slot V700 standard module that can be used in all V700 standard frames.
Versions: |
Maximum Gain 12 dB, 10 dB, 6 dB, 5 dB or 0 dB with corresponding scale |
Custom Colors of Faceplate, Fader Knob and Switch Cap |
Alternatives: |
W766b - Mono Fader |
|